joke 4910880, User Manual

Page: 27 / 68

27
Once you have opened the box, start assembling the
accessories and begin the initial installation procedure; the
machine must be positioned on a flat surface so that it can
be moved on its wheels.
After removing the wooden packaging panels, remove the
wooden retaining blocks using a crosstip screwdriver (figure
14). Remove the straps (plastic ropes with metal clamps)
that secure the machine to the platform.
In order to remove the machine from the crate and place it
on the floor, use lifting straps having suitable load bearing
capacity (the machine weighs about 250kg) and a forklift
with the forks capable of supporting it.
UNPACKING THE MACHINE
INSTALLATION
Figure 14 – Wheel locking blocks
Pass the straps under the machine and tie them to the lifting forks that do not interfere with the machine
(figure 15). Lift slowly, making sure the machine does not rotate in any direction. Once it has been raised
by a few centimetres, slide the platform from under the machine. Lower the forks, always taking care to
prevent the machine from rotating in any direction, until the machine is resting on the ground. Free the
machine from the rest of its packaging.
Figure 15 – Slinging system for lifting the machine