Johnson Controls Joventa BAS1(S), Installation Instructions Manual, Page: 5 / 20

English
IS_BAS1(S) / BAS2(S)_14-88360-1866_Rev. D_04 2016
This document is subject to change without notice
2
Ordering Codes
Codes Descriptions
BAS1 Actuator AC/DC 24 V
BAS1.S Actuator AC/DC 24 V with 2 auxiliary switches
BAS2 Actuator AC 100...230 V
BAS2.S Actuator AC 100...230 V with 2 auxiliary switches
Technical Specifications
Actuators
BAS1(S) BAS2(S)
Drive torque 8 Nm 8 Nm
Running time 30 s 30 s
Power supply AC 24 V ±20% / DC ±10% AC 100...230 V ±15%
Frequency 50-60 Hz
Power consumption:
- operating 2.5 W 3.2 W
- at end stops 0.5 W 0.3 W
For wire sizing 5.0 VA / 3.4 A @ 2ms 5 VA (110)
7.5 VA (230)
Weight 1.1 kg 1.2 kg
Control signals: Y1 ON/OFF and Floating
Position indication: U not
Angle of rotation:
- Working range 90° (93° mech.)
- Limiting not possible
Auxiliary switch rating 3(1.5) A, AC 230 V
Sound power level 45 dB (A)
Protection class II
Degree of protection IP 54 (with cable glands, cable downwards)
Temperature: operating/store -20°...+50 °C / -30°...+60 °C
Humidity 5...95% RH (not condensing)
Maintenance Maintenance-free
Compliance
Johnson Controls, Inc., declares that this product is in compliance with the
essential requirements and other relevant provisions of the EMC Directive
and Low Voltage Directive .