![Johnson Controls JA Series Engineering Manual Download Page 166](http://html.mh-extra.com/html/johnson-controls/ja-series/ja-series_engineering-manual_2023361166.webp)
1
3
4
5
6
7
8
Remote control wiring and Inter-unit
control wiring (field supplied)
Power wiring
(field supplied)
Clasp
Remote control wiring
(field supplied)
Connection for Solenoid
Valve Kit (for 3WAY)
Conduit
(field supplied)
Entirely cover the control
wirings (Remote / Inter-unit
3WAYconnection)
Important Note When Wiring for
J
XM Type
Connect the wires referring to the diagram.
Note that the control wirings (Low Voltages) shall be
segregated from the power supply wires (High Voltage)
as follows:
Connect the Inter-unit control wiring to U1/U2 terminals
and the remote control wire to R1/R2.
Then place and fix the two clasps so that the clasps
shall cover both the remote control wires, the Inter-unit
control wiring and the 3-way wiring harness as shown
in the magnified drawing.
1.
Connect the grounding conductor of the incoming
power supply to the earth (ground) screw before
connecting the power supply conductors to "L1, L2"
of the terminal block.
2.
Securely affix the two power supply conductors
(L1, L2) in the wiring channel by the clamping strap
as shown.
3.
Take care not to damage the remote wiring by the
clasp. Do not leave the remote wiring loose.
J
XM Type
NOTE
Clamping strap
Earth screw
FORM 121.00-EG1
ISSUE DATE: 5/31/2012
JOHNSON CONTROLS
166
Summary of Contents for JA Series
Page 181: ...Schematic Diagram JDHX3652N FORM 121 00 EG1 ISSUE DATE 5 31 2012 181 JOHNSON CONTROLS ...
Page 183: ...Schematic Diagram JDHX4852N FORM 121 00 EG1 ISSUE DATE 5 31 2012 183 JOHNSON CONTROLS ...
Page 189: ...Schematic Diagram JKHX1862N FORM 121 00 EG1 ISSUE DATE 5 31 2012 189 JOHNSON CONTROLS ...
Page 191: ...Schematic Diagram JKHX2452N FORM 121 00 EG1 ISSUE DATE 5 31 2012 191 JOHNSON CONTROLS ...