1
1
1
1
12 DePuy Synthes Instructions for Use Air Pen Drive
Attachments
Drill Attachments
Drill Attachments (05.001.030–05.001.032,
05.001.044)
Speed: approx. 1,800 rpm at 6.5 bar
The system includes straight Drill Attachments with Mini
Quick, J-Latch and AO/ASIF Coupling and a 45° cannu-
lated AO/ASIF Drill Attachment.
The 45° Drill Attachment with AO/ASIF Coupling
(05.001.044) has a cannulation of 1.6 mm, which per-
mits the use of this attachment for drilling and reaming
over Kirschner Wire (e.g. for cannulated screws and for
cup and cone technique).
Mounting and removing tools
Lock unit. Pull back the release sleeve and insert/remove
the tool.
Drill Attachment 45°, cannulated,
with Jacobs Chuck (05.001.120)
Speed: approx. 1,800 rpm at 6.5 bar
Clamping range: 0.5 mm–4.7 mm
The cannulation of 1.6 mm permits the use of this
attachment for drilling and reaming over Kirschner
Wire (e.g. for cannulated screws and for cup & cone
technique).
Mounting and removing tools
Lock unit. Open the chuck with the key provided
(310.932) or by hand by turning the two moving parts
clockwise with respect to each other. Insert/remove the
tool. Close the chuck by turning the moving parts coun-
terclockwise and tighten it by turning the key clockwise.
1
Release sleeve
1
Release sleeve
