Air Pen Drive Instructions for Use DePuy Synthes 41
Problem
Possible causes
Remedy
Pen runs at full speed all the time.
Adjustment sleeve is in the position
FOOT without having a foot switch
attached.
Set adjustment sleeve in position
HAND or LOCK.
Attachments cannot be coupled
to unit.
Attachment coupling is blocked
by deposits.
Remove solid objects with a pair
of tweezers. Attention: When
removing objects, set unit to OFF.
Attachment or tool (saw blade,
drill, burr etc.) cannot be coupled
or only with difficulty.
Movable parts have not been
maintained.
Oil the movable parts.
Tool (saw blade, drill, burr etc.)
cannot be coupled or only with
difficulty.
Shaft geometry of tool damaged.
Replace tool or send to your
Synthes service office.
Bones and tool heat up due to
working process.
Cutting edges of tool are dull.
Replace tool.
No irrigation has been used.
Use irrigation.
If the recommended remedies are unsuccessful,
please contact your Synthes service center.
