CELLO
- User Manual v1.0
Page | 3
Important Safety Information
WARNING - Read the following before proceeding :
Read instructions:
Retain these safety and operating instructions for future
reference. Adhere to all warnings printed here and on the equipment. Follow the
operating instructions printed in this User Guide.
Do not remove covers:
Operate the equipment with its covers correctly fitted. Refer
any service work on the equipment to competent authorised technical personnel
only.
Power sources:
Connect the equipment using the mains power adapter supplied.
Power cord routing:
Route power cords so that they are not likely to be walked on,
stretched or pinched by items placed upon or against them.
Grounding:
Do not defeat the grounding and polarisation means of the power cord
adapter or plug. Do not remove or tamper with any ground connection in the power
cord.
Water and moisture:
To reduce the risk of fire or electric shock do not expose the
equipment to rain or moisture or use it in damp or wet conditions. Do not place
containers of liquid on it which might spill into any openings.
Ventilation:
Do not obstruct any ventilation. If the equipment is to be operated in a
flight-case ensure that it is constructed to allow adequate ventilation.
Heat and vibration:
Do not locate the equipment in a place subject to excessive heat
or direct sunlight as this could be a fire hazard. Locate the equipment away from any
devices which produce heat or cause excessive vibration.
Servicing:
Unplug the power immediately if the unit is exposed to moisture, spilled
liquid, the power adapter becomes damaged, during lightening storms, or if smoke,
odour or noise is noticed. Refer servicing to qualified technical personnel only.
Installation:
Install the equipment in accordance with the instructions printed in this
User Guide. Use the equipment connections for their intended purpose only.
Precautions
Environment:
Protect from excessive dirt, dust, heat and vibration both when
operating and storing. Avoid drinks spillage, tobacco ash, smoke, and exposure to
rain and moisture. If the equipment becomes wet, remove power immediately. Allow
to dry out thoroughly before using again.
Cleaning:
Avoid the use of chemicals, abrasives or solvents. The equipment is best
cleaned with a dry lint-free cloth. Do not remove the cover to clean the unit.
