JMQ E6, User Manual

Page: 12 / 29

12
Φ10 (#56) and 2 lock nuts M10 (#75);
5. Place the top beam (#8) in the position shown in the figure, put the connecting piece (#17) and fix
it with 2 hex head bolts M10x60 (#68), 2 lock nuts M10 (#75) and 4 flat washers Φ10 (#56);
Connect and secure the top beam (#8), rear top beam (#89) and counterweight guide bar (#5)
with 2 hex head bolts M10x25 (#65) and 2 flat pad
Φ10 (#56); attach the 40x80 elliptical pipe
plug (#47) to the top beam (#8).
Installation steps
Figure 3
1. Install 40x80 oval pipe plug (#47) into left connection bend (#117) as shown in the figure;
attach a sandbag hook (#90) to the left connection bend (#117) with a curved spacer
Φ10 (#85)
and a locknut M10 (#75).
2. Install the left column (#116) on the main base (#1) with 3 hex head bolts M10x100 (#71, 6
flat washers
Φ10 (#56) and 3 lock nuts M10 (#75);
3. Insert a left connection bend (#117) at the upper end of the left column (#116) into the rear top
beam (#89) connection with 2 hex head bolts M10x60 (#68), 4 flat pad
Φ10 (#56) and 2 lock
nuts M10 (#75);
4. Attach the back cushion (#39) to the front column (#4) with 2 hex head bolts M8x55 (#64) and 2
flat pads
Φ8 (#55).