JMQ E6, User Manual, Page: 27 / 29

27
Figure 16
1. Hook the sandbag (#54) to the sandbag hook (#90) with a snap ring (#76) as shown.
2. Attach the lower end of the sandbag (#54) to the main base (#1) with a sandbag pull cord (#18).
1
、
Tighten all bolts and nuts with the wrench.
2
、
Now your instrument is fully assembled.
3
、
Check that all pulleys and wire ropes are secured before using them properly.
4
、
In the first stage of use, make certain adjustments to the wire rope according to the act
ual conditions.