JMQ E6, User Manual

Page: 10 / 29

10
Installation steps
Notes:
1. Spacers should be placed on both ends of the bolt (against the bolt head and nut), unless otherwise
specified.
2. For preliminary assembly, hand-tighten all bolts and nuts, and tighten with a wrench when fully
assembled.
3. Some parts have been pre-assembled in the factory.
4. The product is recommended to be installed by more than two people.
Figure 1
1. Main base (#1), on front base (#2), rear base (#3), inserted feet bushing (#49);
2. Insert the 2 counterweight guide rods (#5) into the mounting holes of the main base (#2) with
the 3 large holes in the main base (#1) facing upwards and secure with 2 countersunk hex bolts
M10x20 (#73);
3. Insert the rear base (#3) into the main base (#1) and lock with 2 hex head bolts M10x25 (#65)
and 2 curved spacer
Φ10 (#85) to lock it firmly;