120
ii-2
ii-1
Installation
ii Transportation, unpacking and contents
Transportation
The wheel balancer is supplied on a pallet.
•
Use a pallet truck (
Figure ii-1
) to bring the wheel
balancer to its working area.
Unpacking
WARNING
: PREVENT THE STRAPS FROM
SPRINGING LOOSE AFTER BEING CUT.
•
Cut the straps.
•
Open the top of the box.
•
Remove staples at the bottom of the box. Lift the
box up and over the unit.
•
Carefully unwrap the balancer and spare parts
supplied.
•
Check the contents of the shipment.
Contents
The shipment contains:
- a wheel balancer with Declaration of Conformity
(CE).
- an Operator’s Manual.
- the accessories mentioned in Section 3.1 of the
Operator’s Manual.
- 3 storage hooks and fl anges.
- a mains power cable.
- a wheel guard assembly.
Tools required
- screwdriver / bar (diameter 4.5-5 mm)
- keys:
13,
17 mm
Positioning
•
Remove the bolts that secure the wheel balancer
on the pallet.
CAUTION
: DO NOT LIFT OR MOVE THE WHEEL
BALANCER BY THE MAIN SHAFT OR MEASURING
UNIT.
Refer to
Figure ii-2
.
•
Move the wheel balancer from the pallet to its
working location.
Note
: Use the storage hooks (mount as
instructed in
section
iii) and/or the wheel guard shaft
to handle the wheel balancer.
