101
* = Werkseitige Voreinstellung
Fehlerbeseitigung
Code C28
Hier können Sie Fehlercodes (maximal 10) anzeigen
und löschen des Fehlerspeichers.
Die letzten 10 voneinander abweichenden Codes
für Funktionsfehler werden in den Fehlerspeicher
eingeschrieben, so dass diese z. B. bei der
Ferndiagnose von Funktionsstörungen vom Betreiber
der Auswuchtmaschine abgerufen und übermittelt
werden können.
Die jüngste Fehlermeldung wird in den Speicherplatz
1 geschrieben. Die vorangegangenen Meldungen
werden zu den höheren Speicherplätzen verschoben.
—
Den Code C28 eingeben.
ABLESEN DER FEHLERSPEICHER
—
Die Tasten “+” oder “-” drücken und loslassen, um
die Liste der vorhandenen Fehlermeldungen zu
durchlaufen.
Anm.:
Bei Drücken der Taste wird die Nummer
der Fehlermeldung in der Liste gezeigt;
bei Loslassen der Taste erscheint der
entsprechende Code.
—
Die
STAR-
Taste drücken, um die Nummer der
Fehlermeldung (links) und die gesamte Anzahl
der Wiederholungen dieses Fehlers seit dem
letzten Löschen des Speichers (rechts) noch
einmal anzuzeigen.
LÖSCHEN DER FEHLERSPEICHER
—
Die
ENTER
-Taste drücken.
—
Eine der folgenden Möglichkeiten wählen:
0* = Kein Löschen des Fehlerspeichers
1 = Sämtliche Fehler aus dem Fehlerspeicher löschen
—
Die
ENTER
-Taste drücken.
* = Programmé par le fabricant
Dépannage
Code C28
Vous permet de visualiser les codes d’erreur
mémorisés par la machine (maximum 10) et d’effacer
la mémoire des erreurs.
Les 10 derniers codes d’erreur, non répétitifs,
sont enregistrés en mémoire de manière à ce que
l’utilisateur, par diagnostic distant, puisse récupérer
et consulter les erreurs de fonctionnement qui se sont
manifestées.
Le dernier code est enregistré en mémoire dans
la position 1. Les codes précédents descendent
progressivement dans la liste de mémoire.
—
Entrer dans le code C28.
CONSULTER LES COMPTEURS D’ERREURS
—
Presser et relâcher les touches “+” ou “-” pour
parcourir la liste des erreurs présentes.
Nota bene
: A la pression, il est affi ché le numéro
de l’erreur listé, tandis qu’au relâchement,
apparaît le code correspondant.
—
Presser la touche
STAR
pour faire apparaître
à nouveau le numéro de l’erreur (à gauche) et
le total des répétitions de cette erreur depuis la
dernière mise à zéro de la mémoire (à droite).
EFFACER LES COMPTEURS D’ERREURS
—
Presser la touche
ENTREE
.
—
Effectuer la sélection.
0* = Ne pas effacer les erreurs de la mémoire
1 = Effacer toutes les erreurs de la mémoire
—
Presser la touche
ENTREE
.