NT-2000 REF Manual
Customizing Operation via Menu System
4-13
4.10.3. Outpu t t i ng All Stored Messages
To output all the messages stored in memory, follow the steps given below.
NOTE: A forced carriage return (
)
will be replaced by an underscore ( _ ) (hex 5F ) when it
is output to a PC terminal or a printer.
(1) Highlight “
2: A L L STORED MSG
” on the
SELECT OUTPUT MESSAGES
submenu,
and then press
.
The stored messages will then be output one by one.
Figure 4-20 Outputting All Stored Messages
The following window will pop up to indicate the outputting action in progress.
The window will be turned off automatically upon completion of outputting.
To cancel the action, press
.
(2) Press
to return to the previous menu or
to return to the first receiver
message screen.
OUTPUTTING ALL STORED MESSAGES.
TO CANCEL, PRESS [CLR]
.
Select this option with
/
, and
then press
.
6: SELECT OUTPUT MESSAGES
1: RECEIVING MSG
ON
I
OFF
I
2: ALL STORED MSG
I
3: MSG SELECTED BY FREQUENCY
4: MSG SELECTED BY STATION
5: MSG SELECTED BY TYPE
6: DISPLAYED MSG
7: SELECTED MSG