NT–2000 REF Manual
WARNINGS AND CAUTIONS
ii
< WARNINGS >
1.
HIGH VOLTAGES
HIGH VOLTAGES EXIST INSIDE THE EQUIPMENT CABINET. BE SURE
TO SWITCH THE EQUIPMENT OFF AND UNPLUG THE POWER CORD
BEFORE OPENING THE CABINET FOR INSPECTION OR REPAIRS.
2. INSTALLATION & OPERATING ENVIRONMENT
THE DISPLAY CABINET IS IN THE “PROTECTED” EQUIPMENT
CATEGORY AS DEFINED UNDER IEC 60945(2002), AND IS NOT
WEATHERIZED FOR OUTDOOR INSTALLATION/OPERATION. ANY
DAMAGE CAUSED DIRECTLY OR INDIRECTLY THROUGH WATER
INTRUSION IS NOT COVERED BY THE MANUFACTURER’S OR
DEALER’S WARRANTY.
3. INSTALLATION
&
OPERATING PROCEDURES
ANY DAMAGE CAUSED BY INSTALLING OR OPERATING THE
EQUIPMENT OUTSIDE THE SPECIFICATIONS DESCRIBED IN THIS
MANUAL IS NOT COVERED BY THE MANUFACTURER’S OR
DEALER’S WARRANTY.
CONTACT YOUR DEALER FOR WARRANTY CONDITIONS.
4
.
LIABILITY
●
OPERATION
NEITHER THE MANUFACTURER NOR ITS DEALER IS RESPONSIBLE
FOR ANY LOSS OF LIFE, PERSONAL INJURY OR DAMAGE TO THE
PROPERTY RESULTING FROM THE USE OF THIS EQUIPMENT OR
FROM BEING UNABLE TO OPERATE THE EQUIPMENT FOR ANY
REASON.
●
M A N U A L
REASONABLE PRECAUTIONS HAVE BEEN TAKEN TO PREPARE THIS
MANUAL. HOWEVER, NEITHER THE MANUFACTURER NOR ITS
DEALER ASSUMES ANY RESPONSIBILITY FOR ERRORS OR
OMISSIONS.