NT–2000 REF Manual
Control Panel Functions
2-5
2. Control Panel Functions
(
continued – 5/ 10
)
⑪
Selection/Station Key
–
2/2
･
When option “
5:MAKE SEL / REJ SETTING
” on the
SYSTEM MENU
is currently
accessed for selection/rejection settings, this key selects the station or message
type you specify for reception. An example of station selecting procedure is
illustrated below.
Figure 2-6 Selecting Stations – Example
Currently
selected
stations are shown
in green. Rejected
stations are in red.
Using
/
and
/
, select
the station ID you
wish to receive,
and then press
.
⑫
Right Key
･
When a NAVTEX message is currently being displayed, a single press of this key
scrolls the message text by one message backward chronologically, displaying a
older message.
When the oldest message ( e.g.
1 / 200
) is currently displayed, further keypress
returns you to the newest message ( e.g.
200 / 200
).
Holding down the key accelerates the scroll.
･
When a currently displayed menu has horizontally listed options, pressing this
key selects ( highlights) those options in a rightward direction. Be sure to press
after highlighting the desired option.
(
continued on next page
)
Station C is currently rejected. To select it, press
.
SYSTEM MENU
4:MAKE SEL/ REJ SETTING
1:SYNCHRONIZE BOTH RECEIVERS
2:FIRST RECEIVER ( 518KHZ )
3:SECOND RECEIVER
1:SYNCHRONIZE BOTH RECEIVERS
1:STATIONS
I
2:MESSAGES
1:STATIONS
A:SELECTED J:SELECTED
S:SELECTED
B:SELECTED K:SELECTED
T:SELECTED
C:REJECTED L:SELECTED
U:SELECTED
D:REJECTED M:SELECTED
V:SELECTED
E:SELECTED N:REJECTED
W:REJECTED
F:REJECTED O:SELECTED
X:SELECTED
G:SELECTED P:SELECTED
Y:SELECTED
H:SELECTED Q:SELECTED
Z:REJECTED
I : SELECTED R:SELECTED