NT–2000 REF Manual
Control Panel Functions
2-9
2. Control Panel Functions
(
continued – 9/ 10
)
⑮
Menu Key
･
Pressing this key opens a menu termed “
SYSTEM MENU
,” as shown below, to
customize the operation to suit your specific needs by making various settings, to
test the receiver performance off–line, or reset the entire system to the initial
settings. See paragraphs in section 4 for greater details.
Figure 2-11 SYSTEM MENU
･
To turn the menu off,
press
again or
*
1
.
･
A desired menu option
can be selected by
highlighting it with
/
, followed by
.
･
The functions of each option are summarized below.
1: MAKE DISPLAY SETTINGS
:
Selects display background colors, turns
on/off screen sleep mode, or selects message
font types.
2: SELECT 2ND RECEIVER FREQUENCIES
: Selects 490 or 4209.5 kHz.
3:
TURN ON / OFF KEYPRESS BEEP
:
Turns on/off keypress beep.
*
2
4: MAKE SEL / REJ SETTINGS
:
Selects or rejects stations or message types.
5:SEARCH STORED MESSAGES
:
Search stored messages by station and/or
message type.
6: SELECT OUTPUT MESSAGES
:
Selects messages to be output externally.
7: SET OUTPUT PORTS
:
Sets output ports on/off, selects protocols,
formats, etc.
8: START SELF–DIAGNOSTIC TESTS
: Executes self–diagnostic tests.
*
3
9: TURN ON / OFF MESSAGE ALARM
:
Turns on/off message alarms.
*
4
0: RESET TO FACTORY DEFAULTS
:
Initializes user–made settings.
*
1
:
Pressing this key returns you to the first receiver screen as well as turns the menu
off.
*
2
:
Types A, B, D and L messages cannot be rejected due to relevant IMO resolutions.
*
3
:
Alarm for type–D messages cannot be turned off due to relevant IMO resolutions.
*
4
:
Stored messages will not be erased from memory by executing this function.
Detailed information on each menu option is given in section 4.
(
continued on next page
)
S Y S TE M M E N U
1: MAKE DISPLAY SETTINGS
2:
SELECT 2ND RECEIVER FREQUENCIES
3:
TURN ON / OFF KEYPRESS BEEP
4:
MAKE SEL / REJ SETTINGS
5:
SEARCH STORED MESSAGES
6. SELECT OUTPUT MESSAGES
7. SET OUTPUT PORTS
8.
START SELF–DIAGNOSTIC TESTS
9: TURN ON / OFF MESSAGE ALARM
0. RESET TO FACTORY DEFAULTS