SECTION 4 - BASIC HYDRAULIC INFORMATION & SCHEMATICS
4-28
31215079
4.11
CHARGE PUMP FILTER
REMOVAL
1. Disconnect and cap the hydraulic lines (5 and 6) on
the filter assembly (3).
2. Remove the mounting bolts/washers (2) on top to
remove the filter assembly from the bracket.
INSTALLATION
1. Attach filter assembly (3) to mounting bracket (1)
using the mounting bolts/washers (2).
2. Uncap and reconnect the hydraulic lines (5 and 6) to
the filter.
NOTE:
If removed and reinstalled, filter bowl torque is 30 ft.
lb. (40 Nm).
MAF06120
1
2
3
5
4
6
7
Figure 4-12. Charge Pump Filter
1. Mounting Bracket
2. Filter to Bracket Bolts/Washers
3. Filter Assembly
4. Filter Bowl
5. Inlet Hose from Port F (Out) - Axial Pump
6. Outlet Hose to Port E (Return) - Axial Pump
7. Rear Wall of Engine Compartment
Go
to
Discount-Equipment.com
to
order
your
parts
