SECTION 3 - CHASSIS, PLATFORM, & SCISSOR ARMS
3-54
31215079
Options Control Module
The Options Control Module provides additional machine harness connections for additional machine components
such as the Leveling Jacks and LSS control system. If determined faulty, this module is only replaceable and not service-
able.
REMOVAL
1. Tag and Disconnect the wiring harness(s) from the J-
Connectors on the module.
2. Remove the four nuts and washers (4) from the
mounting bolts.
3. Remove the module from the mounting plate.
INSTALLATION
1. Mount new module to the mounting plate using the
four bolts, nuts and washers (4)
2. Reconnect the J-Connector wiring harness(s).
3. Power up machine and operate functions to check
proper operation.
1. Option Control Module
2. Ground Control Station
3. Station/Module Mounting Plate
4. Module Mounting Bolts/Nuts/Washers
5. J1-Connector
6. J2-Connector
7. J3-Connector
8. J4-Connector
9. J5-Connector
Figure 3-45. Optional Control Module
1
Go
to
Discount-Equipment.com
to
order
your
parts
