SECTION 3 - CHASSIS, PLATFORM, & SCISSOR ARMS
3-60
31215079
ALLOW ENGINE AND COMPONENTS TO COOL DOWN BEFORE SERVIC-
ING.
REMOVAL
1. Disable machine operation. Disconnect battery posi-
tive (+) terminal. Swing engine tray (5) out for access
to both sides of engine.
2. Remove platform ladder and brackets, exhaust sys-
tem, air cleaner system, hydraulic pumps and raditor
cooling system, as necessary.
3. Disconnect, cap and label all hoses connected to
engine (1). Disconnect and label all electrical wiring
connected to engine.
4. Using the lifting lugs (2) at the front and rear corners
of the engine, support engine (1) with lifting device
capable of lifting 500 lbs (227 kg) (refer to engine
manual for proper lifting information).
5. Remove the four large bolts, nuts, and washers secur-
ing the left/right side engine mounting brackets (3)
to the isolator mounts (4) and tray.
6. Slowly lift the engine up and out of the engine com-
partment.
IF NOT REMOVED, BE CAREFUL NOT TO DAMAGE THE RADIATOR FAN
ON THE RADIATOR HOUSING WHEN LIFTING THE ENGINE.
INSTALLATION
1. Follow Removal Steps in reverse.
NOTE:
Apply Medium Strength Threadlocking Compound
to the engine mount bolts
Go
to
Discount-Equipment.com
to
order
your
parts
