SECTION 3 - CHASSIS, PLATFORM, & SCISSOR ARMS
31215079
3-55
3.13
BATTERY
REMOVAL
1. Disconnect the red battery cable from the positive
battery terminal (3).
2. Disconnect the black battery cable from the negative
(2) battery terminal.
3. Remove the bolts, nuts, and washers to remove the
hold-down bracket (4) securing the battery in place.
Remove battery.
4. With the positive battery cable disconnected, if nec-
essary, the auxiliary power block (5) can be removed
by first disconnecting the cables from the block.
Remove the bolts, washers and nuts securing the
block to the machine compartment cover.
INSTALLATION
1. Place battery in the seat. Negative battery terminal
(2) should be closest to outside of machine.
2. Secure battery in place with the hold-down bracket,
bolt, nut and washers (4).
3. Reconnect red battery cable to positive battery ter-
minal (3). Secure terminal cover in place over termi-
nal.
4. Reconnect black battery cable to negative battery
terminal (2).
5. If removed, secure auxiliary power block (5) to
machine using two bolts, nuts and washers. Recon-
nect cables.
Figure 3-46. Battery Removal
1. Battery
2. Battery Terminal (-)
3. Battery Terminal (+)
4. Bracket, Bolt, Nut & Washers
5. Auxiliary Power Block
(-)
Go
to
Discount-Equipment.com
to
order
your
parts
