SECTION 3 - CHASSIS, PLATFORM, & SCISSOR ARMS
31215079
3-63
Exhaust System
Dual Fuel - Gas/LPG
ALLOW ENGINE AND COMPONENTS TO COOL DOWN BEFORE SERVIC-
ING.
REMOVAL
1. Disable machine operation.
2. Disconnect the O2 sensor (2) wiring. Disassemble the
tail pipe (1) from the muffler (3) by removing the
attaching hardware.
3. Disassemble the muffler (3) from the exhaust pipe (6)
removing by the attaching hardware. Also remove
the two bolts and washers attaching the muffler to
the mounting bracket (4).
4. Disconnect the O2 Sensor (2) wiring. Disassemble the
exhaust pipe (6) from the engine exhaust manifold
by removing the attaching hardware.
INSTALLATION
1. Follow Removal Steps in reverse.
NOTE:
Torque on O2 Sensors is 32 ft. lb. (44 Nm).
Diesel
ALLOW ENGINE AND COMPONENTS TO COOL DOWN BEFORE SERVIC-
ING.
REMOVAL
1. Disable machine operation.
2. Unbolt the muffler (1) from the mounting bracket (3)
by removing the bolts, nuts, and washers from the
rubber isolating mounts.
3. Disassemble the muffler (1) from the exhaust mani-
fold by removing the four bolts, washers, and gasket
(2) attaching it to the manifold.
INSTALLATION
1. Follow Removal Steps in reverse.
Dual Fuel - Gas/LPG
Diesel
Figure 3-53. Exhaust System (Kubota Engine)
1. Tail Pipe
2. O2 Sensor
3. Muffler
4. Mounting Bracket
5. Gasket
6. Exhaust Pipe
1. Muffler
2. Gasket
3. Mounting Bracket
1
MAF04140
1
2
3
Go
to
Discount-Equipment.com
to
order
your
parts
