Jetter JM-35 S1 Series, Manual, Page: 5 / 124

Jetter AG 5
DE
CN
IT
EN
JetMove 3000
Article no: 60880300
Version 1.1
4
September 2020 / Printed in Germany
This document has been compiled by Jetter AG with due diligence, and based on the known state of the art.
In the case of modifications, further developments or enhancements to products shipped in the past, a revised
document will be supplied only if required by law, or deemed appropriate by Jetter AG. Jetter AG shall not be liable for
errors in form or content, or for missing updates, as well as for damages or disadvantages resulting from such failure.
The logos, brand names, and product names mentioned in this document are trade marks or registered trade marks of
Jetter AG, of associated companies or other title owners and must not be used without consent of the respective title
owner.
NOTE:
This document does not replace the User Manual JM-3000 Servo Amplifier
and the User Manual JM-3000 Supply Unit, instead it supplements these
two documents with the description of the safety function S1 (STO and
SBC).
Please always follow the information given in “For your safety”, “Intended
use” and “Responsibility” in the above-mentioned user manuals.
You will also find information on mounting, installation and commissioning
along with the assured technical characteristics of the JM-3000 system in
the above-mentioned user manuals.
Subject to technical change without notice.
The content of our documentation was complied with the greatest care and
attention, and is based on the latest information available to us.
Nevertheless, we advise that this document cannot always be updated in
parallel with the ongoing technical development of our products.
Information and specifications can change at any time. For information on
the latest version please visit www.jetter.
NOTE:
This documentation ist to be kept!
The German version of this document is the original version, versions in all other
languages have been translated from the original text
.