Jetter JM-208-480-OEM, User Manual, Page: 49 / 128

JetMove 208-480 7.2 Motor Connection
Jetter AG 49
Specification of the Motor Power Cable with Mating
Connector SC for JetMove 208-480
Connection without motor holding brake
Dimensions of the motor mating connector are specified in millimeters.
Motor Power Cable - Cable Assy No. 26.1
Connecting
Terminals of
JetMove 208-480
Shield Mating Connector
of the Motor
(female, solder
side)
4 x 1.5 mm
2
(AWG 16(4))
Shielded,
highly flexible
4-wire cable
with PE (GND)
The wires are
equipped with wire end
ferrules.
Connect both sides of the
shield with the greatest
possible surface area!
Use metallized housing only!
Pin Wire Number Signal Pin
X62.U2 1 Phase 1 1
X62.V2 2 Phase 2 5
X62.W2 3 Phase 3 2
X62.PE
(GND)
yellow-green PE/GND
grounding
Mating
Connector
Solder
Side
Solder
Side
18
26
65
5
2 4
6
1