Jetter JM-208-480-OEM, User Manual, Page: 36 / 128

5 Technical Data
36 Jetter AG
Short-circuit protection, motor side Designed for:
• Phase to phase
• Phase to earth
Motor overload protection Refer to "Motor Protection" on page 39
Motor cable
Cable size
Material
Capacitance
Temperature class
Max. length of motor cable
4 * 1.5 mm
2
(AWG 16)
Copper
< 150 pF/m
> 60 °C
50 m max.
(for greater length please contact
Jetter AG)
Line filter Line filter ensuring EMC
in a
residential
environment to DIN EN 61800-3. The
following filters can be applied with input
circuits:
– FMAC 932-1610 with I
r
= 16 A
– FMAC 932-2510 with I
r
= 25 A
– FMAC 934-3610 with I
r
= 36 A
See "Note 2!" on page 38.
Voltage supply of processor logics
(demands on power supply module) • DC 24 V (20 ... 30 V)
•
≤
0.6 A
• The voltage output of the power
supply unit must comply with the SELV
or PELV type.
Inrush current limitation of the
processor logics • The JM-208-480 is equipped with a
220 µF capacitor for buffering. The
inrush current is not limited.
Internal ballast resistor • Resistor: approx. 88 .(PTC)
• Continuous output: 140 Watt
Peak output: 3 kW for 0.6 s
• Overload protection internal (warning
and error)
External ballast resistor In order to achieve greater brake power, an
external ballast resistor can be installed.
For this, see "Connection of External
Ballast Resistor and DC Link Circuit of
Another JM-208-480" on page 64.
Residual voltage To avoid hazard of electrical shock wait at
least 7 minutes after switching-off the
digital servo amplifier before attempting to
pull out the plug or remove this unit (see
page 18).
Electrical Specifications
Ω