Jetter JM-208-480-OEM, User Manual, Page: 108 / 128

14 Counting Input (Option)
108 Jetter AG
14.2.2 Description of Connections
Specification of Mating Connector for X72
• 9-pin male SUB-D connector
• Metallized enclosure
EnDat Cable Specification
• Cable size: 2 * 2 * 0.14 mm² + 2 * 0.25 mm² (AWG 26(4) + AWG 23(2))
2 * 0.25 mm² has to be used for power supply and GND.
• The cables have to be twisted in pairs and included in an overall shielding:
• The following signal lines have to be twisted in pairs:
DATA - and DATA +
Clock - and Clock +
0 V and voltage supply
• The shield has to be connected to the connector housings on both ends of the
cable with the greatest possible surface area.
• Material: Copper
• Temperature class: 60 °C
• Maximum cable length: 100 m
14.2.3 EnDat Cable with Mating Connector
HIPERFACE® mating connector (solder side)
Fig.: 32: RC series mating connector of the EnDat (internal thread M23)
Notice!
The resolver, HIPERFACE®, respectively EnDat mating connector of the Jetter
motor types JL, JK, and JH can be ordered from Jetter AG by supplying the following
particulars:
Item no. 15100069 Resolver / HIPERFACE®
The complete HIPERFACE® / EnDat cable between the servo amplifier series
JetMove 2xx and the Jetter motor types JL, JK, and JH can be ordered from Jetter
AG by supplying the cable specifications and the respective cable length in cm:
KAY_0723-xxxx for the servo amplifier series JetMove 2xx
Solder
Side
12
9
11
5
7
8
6
4
10 2
1
3