EN
The controller should be connected to the flight battery and motor using high quality
connectors. Please see the guidelines below for proper connector installation and cable
lengths.
When you switch-on the MEZON controller, you will hear signal tones from the motor.
The tones below indicate for following conditions:
The controller has recognized a correct control pulse which complies with the STOP
(low throttle) position and is prepared to start the motor.
The controller has recognized an incorrect throttle control pulse. Check the
transmitter throttle setup to make sure that the throttle output is actually zero at
the low stick position. If necessary, reverse the throttle in your transmitter or
check your throttle throw setups.
The controller has recognized a low supply voltage. Check your battery condition
or change the controller set-up (menu “LIMITS”).
6
3.
Connecting the Controller
