EN
3.1
Soldering the Connectors
Use only new and high quality connectors and properly solder them to the cables.
We recommend bullet style connectors G4 (max. 75 A) and G5 (max. 150 A).
In order to ensure that after
1)
soldering no bare cable is exposed out of
the connector soldering cavity, remove
the cable insulation in the exact length
corresponding to the cavity depth.
2)
Heat up the bare end of the cable with
the soldering iron and apply solder
around the cable circumference (“tin” the
wires). Take care to supply adequate heat.
3)
Fix the connector in vertical position
(for instance, in a vice) for easier
soldering of the cable.
7
