EN
acceleration time. This menu controls the force with which the motor starts.
Timing
–
Motor timing (ignition advance) settings within the range of 0° to 25°. You may
also select automatic timing. These settings will vary with the motor type.
Recommended values:
2 pole motors…0-5°, 4 pole motors…0-10°, 6 pole motors… 0-20°, 8 and
more pole motors…20-25° - for instance outrunners.
Motor poles
–
enter the number of motor poles. This parameter is important for the
correct RPM speed detection.
Rotor gear
–
enter the correct gear ratio. For direct drives(no gearbox) select 1,0:1.
4.4
BEC* Set-up Menu
MEZON 130
6-51V SBEC 6/15A
Measurement menu
Actual values >
Measurement menu
< Min/Max log. >
Setting menu
< Controller >
Setting menu
< Limits >
Setting menu
< Motor >
Setting menu
< Sbec setting>
SBEC Voltage
–
The stabilized BEC voltage can be set to your desired output from 5V to 8V
in steps of 0,1V. (This applies only to MEZON controllers equipped with a BEC.)
*
Not available in the MEZON OPTO controllers menu.
21
