JETI model Duplex DC-16, Manual

Page: 171 / 222

computer radio control system
EN
4. 4.
3. Global or Separate Function Curve Setting
The function curve configuration for all channels can be set
collectively for all flight modes by selecting the
“G-Global (globe)”
symbol or you can set individual function curve settings in each
separate flight mode by sellecting the
“S-Separate” symbol.
9.2.6 Aileron Differential
The aileron differential function reduces the downward travel of the
aileron(s) to help eleminate any adverse yaw tendencies in rolling
maneuvers. Semi-Symmetrical airfoils with an aileron in the down
position induce higher drag than when the aileron is in the up
position. Therefore, the aileron travel up and down has to be set
differently. The number of aileron servos displayed depends upon
the selected wing type of your airplane; the maximum number is
four
“S1-S4”.
1. A ileron Differential Global or Separate Setting
The aileron differential for all channels can be set collectively for all
flight modes by selecting the
“G-Global (globe)” symbol or you can
allow individual aileron differential settings in each separate flight
mode by sellecting the
“S-Separate” symbol.
2. Aileron Differential Setting
All of the ailerons can have different travel ranges. The different
adjustments are displayed in columns marked
„S1-S4” . The number
of servos in use is equal to the number of displayed setup columns.
The travel range for each servo can be set. Scroll and highlight either
the
“Up” or “Down” menu line with “3D Control” button. Press the
„3D Control“ button to access and edit the settings for each servo. If
53