JETI model Duplex DC-16, Manual

Page: 180 / 222

computer radio control system
EN
9.3. Advanced Properties
Advanced programming menu for DC/DS-16.
9.3.1 Other Model Options
This menu contains additional, special features of the DC/DS-16
transmitters.
1. Auto-Trim Function
Auto-Trim function can be activated using any assigned switch,
knob or stick. Once this function has been activated you can trim
your model using transmitter gimbals. The direction and speed of
the trim adjustment is determined by stick movement. Larger stick
movements equal a faster trim response. When the Auto-Trim
function is active, the transmitter gimbals do not change their
standard response. The transmitter is still in normal operation mode.
It is advised to use the automatic trim function only for
the maiden flight, after proper trimming is done we
recommend disabling this function. Advice:
2. Trainer Function
The Trainer function can be set so that it may be activated using any
assigned switch, knob or stick.
3. Telemetry Recording
The Telemetry recording function can be set so that it may be
activated using any assigned switch, knob or stick. The data stream is
recorded on the internal SD memory card. All data can be found in
the
“Log” directory of the transmitter software after connecting the
Tx to the PC via a USB port. Active data recording is indicated on the
upper edge of the main desktop screen by a blinking circle. A solid
square graphic indicates that recording is stopped.
4. Throttle Cut Setting
This safety feature is mainly for models using glow or gasoline
engines as their main source of power. Electric models can also
highly benefit from this safety feature. The Throttle Cut function can
be activated using any assigned switch, knob or stick. By editing the
“Output Value” item, the throttle output will move to the user
4. 4.
1
2
3
4
5
62