JETI model Duplex DC-16, Manual

Page: 205 / 222

computer radio control system
EN
10 Transmitter to PC Connection
The Jeti Duplex line of transmitters is equipped with a mini USB port.
The Transmitters also come with a standard USB to mini USB cable
which is used to connect your transmitter to a PC. The Jeti Duplex
system is fully compatible with Microsoft Windows XP and higher
versions of Windows OS. After connection and confirmation your
transmitter will be identified by the PC as another memory drive.
While it is connected to a PC your transmitter‘s battery is also being
charged via the USB port.
After your transmitter has been connected to a PC it will behave like
standard external hard drive. Your transmitter’s file directory is
displayed on the PC screen. Pay close attention to moving, deleting
or adding files to any open file directory, any changes performed
here have a direct effect on your transmitter‘s internal data
File Directory
Audio – sounds, music, and acoustic warnings
Config – software configuration
Lang – language configuration
Log – telemetry data, all files use date stamp year/month/day
Manual – instruction manual
Model – programming files of individual models
Update – directory used for software updates
The Jeti Duplex line of transmitters fully supports future software
updates. We recommend that you check the distributor’s and/or
manufacturer‘s web sites frequently for the most current update.
How to update your transmitter’s firmware:
1. Connect your transmitter to a PC via USB port
2. Confirm the connection
3. On the PC screen, open the file directory and copy the new
software update to the “Update” file.
4. After the successful data transfer, disconnect your transmiter
from the PC USB port and turn OFF the transmitter. The next
time that you turn your transmitter ON, the software will be
updated.
With any new firmware update no model setups or configuration
settings will be lost. For safety, after performing a new update, we
highly recommend that you check all functions, assignments,
configurations, and model mixes. A list of new features is always
released with the firmware update.
At this time, the Jeti firmware supports *.wav sound files. Any sound
file can be assigned to any function, switch, flight mode, telemetry
alarm, or music routine. Your applications are limited only by your
imagination. All sounds must be copied to the
“Audio” file.
10.1 Memory & System Files
10.2 Update firmware
10.3 Sounds, Alarms & Acoustic Updates
5.
5.
87