APPENDIX 2. –FAQ
1. How to disable the DHCP function and use a static IP instead?
A
：
Turn the “DIP SWITCH” from “3” to “4” and vary the relative network settings, the IP Address,
NetMask and Gateway on the image web page.
2. Can the CF Card be removed during recording?
A
：
No, it cannot be removed until the recording comes to a single point. The POWER LED
flashing light signals the CF card is operating. The green light indicates the unit is activating. The
red light warns the CF card cannot be removed. If the CF card is withdrawn in this mode, the card
will break.
3. I’ve set the function of “Motion Detection” but it doesn’t seem to work.
A
：
Check if “Motion range” and “Sensitivity” have been set before activating the function.
4. My AVI files recorded in the CF Card cannot be displayed. What can I do to display the files?
A
：
Please visit “http://www.morgan-multimedia.com/” to download “Morgan M-JPEG codec” and
install it, and then check the selection of the “IJP Core”.
RMN010200170_v3.0
76
