Jetcom CCTV JCK-32CL Installation & Operation Manual Download Page 11

Page: 11 / 78

2.3 Flank Panel

ALC

LENS

POWER LAN

1 AES

2 DC IRIS

3 DHCP

4 STATIC IP

RS-485

3 4

1. Lens

Mount:

This LAN CAMERA can be used with either C or CS mount lens.

2. IRIS:

Auto iris connector.

This camera works with DC drive auto iris lens. Please refer to the pin assignment

marked on the camera when connecting the auto iris lens.

3. ALC

VR:

Iris control VR.

When an auto iris (DC Drive) lens is used, this VR is used to adjust the iris for different

lighting environments. Adjust the VR clock-wise to open the iris and counter-clockwise

to close the iris of the camera.

4. DIP

Switch:

1. AES:

Auto electric shutter.

2. DC IRIS:

Use auto iris (DC drive)

3. DHCP:

Turn On / Turn Off the DHCP protocol. The switch points

upwards, the device can change the setup of network function
(enable/disable) via the network.

4. STATIC IP:

The switch points down, the device can’t change the

setup of network function (enable/disable) via the network.

5. RS-485:

Supports the RS-485 protocol.

6. POWER

Indicator

Indicates the power status of the unit. The green light indicates the

unit is activating. The red light indicates the power cannot move. If the CF Card is

withdrawn in this mode, the card will break.

7. LAN

Indicator

Indicates the LAN status of the unit. The green light indicates the 100

Mbps Ethernet network is activating. The red light signals the LAN is data linking.

Summary of Contents for JCK-32CL















































































Search results

Summary of Contents for JCK-32CL

Reviews:

Related manuals for JCK-32CL

Brands by name

Popular brands

Jetcom CCTV JCK-32CL, Installation & Operation Manual

Search results

Summary of Contents for JCK-32CL

Reviews:

Related manuals for JCK-32CL

Brands by name

Popular brands