Set the Motion Detection of the Motion page.
1. When in the Device List, select a desired channel to enable the
button, and click the
button to enter the Device Setting page. (See the sample screen as in
A
above)
2. Click the
Motion
button at the top of the page
to enter the
Motion Detection
function
of the
Motion
page. (See the sample screen as in
C
above)
3. Click the check mark on or off in the “Enable” box at top left to respectively enable or disable
the motion detection function.
4. Click and drag the mouse across a targeted zone to draw a red rectangle on the image
(coordinates provided above).
5. Click your required level of “Sensitivity” at the bottom of the page
6. Click the
Apply
button to save the motion detection range.
Set the settings of the CF-Card page.
1. When in the Device List, select a desired channel to enable the
button, and click the
button to enter the Device Setting page. (See the sample screen as in
A
above)
2. Click the
CF-Card
button at top right to enter the
CF-Card
page. (See the sample screen as in
D
above)
3. Click either the ”JPEG” or the “AVI” options under “Storage Format” at top right if and as
necessary.
4. Click the
Apply
button to submit the new
CF-Card
setting of the recording.
60
