5.2 The LAN CAMERA Viewer
This section provides instructions for installing and using the Network Viewer, and Image Viewer,
which are included with the LAN CAMERA. The programs can be operated by a selected PC
equipped with the following requirements.
5.2.1 Introduction to Network Viewer
The Network Viewer allows you to potentially access many units of the LAN CAMERA from a
remote desktop or a laptop in a TCP/IP networking environment. It can perform the following
functions.
View live images from the LANCAMERA.
Store, search, and review recorded video from the FTP server, PC, and CF card.
Change the regular record, event record, and timer properties.
Before you are ready to view images from a desktop, you need to have your LAN CAMERA
networked by obtaining a 10/100 base-TX Ethernet data cable (Standard RJ-45) to connect
the LAN CAMERA to your LAN/WAN. Now enter the main menu to set the IP address.
5.2.2 Install the Network Viewer in your PC
Install the Network Viewer from the supported CD-R.
1. Exit all applications currently running in the selected PC.
2. Insert the supported CD in the CD-ROM drive. The program will execute the installation
automatically. Follow the on-screen instructions to proceed with the rest of the installation
procedure as they appear.
3. After the installation is complete, pop up the
START
menu from your computer, and point
to
Programs
/
LanCam
Network Viewer
to open up the program selection page as shown
below. Click the
LanCam
Network Viewer
tag to start the
LanCam
Network Viewer
program.
52
