steps.
3. If no cross sign appears beside the "CF" icon, please go forward to the next step. If a cross sign
appears, please check out the followings:
a. Is it really a CF "Memory" Card?
b. Is this CF Card formatted with the FAT16 format?
c. Connect the CF Card with a PC and test whether the PC can read the data or not?
d. Dose this CF Card still have capacity for storing data?
e. Is the CF Card set to be writable?
If all the answers are "yes" but the cross sign still exists, please contact your technical support
and ignore the following steps.
4. Please make sure the function of "CF CARD ENABLE" is enabled on the ALARM and
SCHEDULE pages if no cross sign appears beside the "CF" icon on the screen.
5. After recording, read the data through the web page of "cfget.htm". If the data cannot be read
through the networks, please read it by a PC instead and check out the data stored in the
"LANCAM" directory and please contact your technical support no matter regardless of whether
there is data or not.
Warning
:
1. Performing this troubleshooting process may need a monitor, a PC, a card reader and
some cables.
2. If the CF Card is removed while storing or accessing data, data will be lost.
3. If there is a cross sign beside the "CF" icon, it means the CF Card has been inserted into
the LAN CAMERA but cannot perform the writing function. Possible reasons are:
a. It is not a CF memory card.
b. The CF Card is unformatted or formatted with a non-FAT16 or non-FAT12 format.
c. The file system is damaged.
d. The capacity of the CF Card is full.
e. The CF Card is set to be read only.
4. Shut the power before inserting the CF Card. Otherwise the unit may shut down.
13
