CHEMICAL PUMPS
The model 727E is supplied with factory installed liquid detergent
and rinse additive pumps to automatically dispense during each
wash & rinse cycle. Before accessing the bottom
section of the dishwasher, make sure that the power is
turned off at the source (breaker panel).
The bottom panel can only be removed with a flat tool
like a screwdriver.
Insert the screw-driver in the gap between the front
panel and the side panel. Pry open towards you.
Do this on both sides.
The red & blue hoses connected to the pumps must be routed out
of the bottom of the dishwasher. The red tube is for detergent and
the blue tube is for rinse additive. The containers can be either to
the right or left of the dishwasher. Perforating the stainless panel
is not recommended. The two chemical pumps are factory
adjusted to accommodate most installations.
There is a mark on the pump indicating this setting.
It is recommended that only qualified personnel alter these
settings.
UNDER NO CIRCUMSTANCES should the detergent pump be
turned off.
RINSE ADDITIVE
BLUE TUBE
DETERGENT
RED TUBE
9
