Connecting your new 727
**WATER SUPPLY**
A
3/4” NPT fitting is required with 30 psi. dynamic
pressure. A water pressure regulator* may be required.
The water flow pressure cannot be less than 30 psi or
exceed 30 psi. If the water pressure exceeds the
prescribed amount, you will get inconsistent washing
temperature, premature failure and thus may void the
warranty.
Incoming water temperature must be 140º F (60º C). An
easily accessible shut-off valve is recommended,
making installation, service and maintenance easier.
A flexible drain hose is provided to make installation,
servicing and maintenance easier. Make sure that the
water is free from calcium and hard water deposits. For
these situations, an inline water cartridge system is
highly recommended. Build-up of calcium and lime
deposits in the washer may occur and servicing will be
required on a more frequent basis which will not be
covered by the warranty.
**DRAIN**
This dishwasher is equipped with an automatic drain
pump that will pump the drain water to a maximum
height of 36" (0.9 meter). A 1" ID flexible drain hose is
supplied to facilitate maintenance and servicing of the
machine. It is important not to reduce the size of this
hose. A 1" check-valve* may be required. Drain pump
equipped machines have a white button on the control
panel beside the green power button.
* - not supplied
** SEE PAGE 6 FOR FURTHER IMPORTANT DETAILS**
7
Pumped Drain