Jesco EASYPOOL SMART 02, Operating Manual

Page: 3 / 44

EASYPOOL SMART 0 Operating Manual | 3
Safety Instructions
1. Safety Instructions
1.1 General
This manual contains very important information for assembly,
start-up, use and maintenance of the meter. The manual must
be read by all staff and any person in charge of the unit before
starting work on the equipment. Store the manual safely in a
place where mechanics, installers and other technical staff as
well as operators can rapidly access it in case of emergency. Pay
special warning and provide compliance with all safety notices
in this manual!
1.2 Identification of safety instructions in this operating
manual
This Operation & Maintenance Manual contains vital information
which may endanger people and the unit if they are disregarded.
These statements are identified by the following symbols:
WARNING!
Refers to a potentially hazardous situation. Failure to
follow this instruction may lead to death or extremely
serious injuries.
CAUTION!
Refers to a potentially hazardous situation. Failure to
follow this instruction may lead to minor injuries or
damage to property.
IMPORTANT! or NOTICE!
Failure to follow these safety instructions may en-
danger the machine and its functions.
IMPORTANT!
This indicates additional information that makes work
easier and ensures trouble-free operation. Notes
attached directly to the unit, e.g. cable references,
directly must be observed and kept in a fully legible
condition for future reference.
1.3 Operators qualification and training
Your assembly, operation, maintenance and inspection staff must
be trained and have the appropriate qualification for use and op-
eration of the unit. Area of responsibility, tasks and supervision
of the personnel must be provided at all times by the customer.
Unskilled operators must be duly trained and instructed. If neces-
sary, this can also be undertaken by the manufacturer or certi-
fied supplier on behalf of the owner. Operators who are to work
with the meter must read and understand the manual in all of
its parts.
1.4 Electrical safety tips
Basic safety precautions should always be followed when install-
ing and using this electrical equipment. These precautions in-
clude the following:
WARNING!
1.) Read and follow all instructions.
2.) To reduce the risk of injury, do not permit children
to use this product unless they are closely super-
vised at all times.
3.) Risk of electric shock. Ensure that the device is
secured with an earth-leakage circuit breaker (GFCI).
Contact a qualified electrician if you cannot verify
that the receptacle is protected by a GFCI.
4.) Do not bury the cable. Locate cord to minimize
abuse from lawn mowers, hedge trimmers, and
other equipment.
5.) To reduce the risk of electric shock, replace the
cable immediately if damaged.
6.) To reduce the risk of electric shock, do not use an
extension cable to connect the device to the power
supply; use an appropriately located outlet socket.
7.) Keep this instruction at close for future refer-
ence.
ATTENTION!
The device is not suitable for installation in explosive
areas.
1.5 Hazards due to failure to follow safety instructions
Failure to comply with the safety instructions may endanger not
only people, but also the environment and the unit. Non com-
pliance with the safety information will immediately cancel your
rights of claiming for damages even during the warranty period.
The following hazards in particular may arise: - Failure of system
functions. - Danger to people due to electrical, mechanical and
chemical effects. - Danger to the environment due to leakage of
hazardous substances.
1.6 Safety-conscious working
The safety instructions contained in this operating manual must
be observed. The operating company is responsible for ensuring
compliance with local safety regulations. Disturbances suscepti-
ble of impairing safety are to be eliminated immediately!
1.7 Safety instructions for the operator
Statutory regulations must be observed. A safe and ecologically
beneficial disposal of process materials as well as replacement
parts must be ensured. Danger due to electric current must be
excluded (for further details, refer to the German VDE
1) standards
as well as local rules and regulations as well as chapter 1.4).
1) Association of German Electrotechnical Engineers