Jenn-Air JB36NXFXLW00, Technical Education

Page: 77 / 91

5-5
1. Unplug refrigerator or disconnect power.
2. Disconnect one of the wires going to the
door/drawer switch.
3. Set the ohmmeter to the R x 1 scale.
4. Touch the ohmmeter test leads to the
N.O. and COM door/drawer switch termi-
nals. The meter should indicate an open
circuit (infinite).
5. Press the door/drawer switch actuator
button and the meter should indicate
continuity (0
Ω
).
6. Touch the ohmmeter test leads to the
N.C. and COM door/drawer switch termi-
nals. The meter should indicate continu-
ity (0
Ω
).
NOTE: The door/drawer switches are
normally closed.
7. Press the door/drawer switch actuator
button and the meter should indicate an
open circuit (infinite).
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
WARNING
DOOR/DRAWER SWITCH FILL TUBE HEATER
NOTE: The heated fill tube will be energized
for 90 minutes after each ice maker
harvest and fill.
1. Unplug refrigerator or disconnect power.
2. Disconnect the ice maker inlet heated fill
tube wire connector from the main har-
ness.
3. Set the ohmmeter to the R x 1K scale.
4. Insert the ohmmeter test leads into the
two connector pins of the ice maker in-
let heated fill tube connector. The meter
should indicate approximately 3420
Ω
.
COMPONENT SPECIFICATIONS (continued)