Jenn-Air JB36NXFXLW00 Technical Education Download Page 11 | Manualshive

Page: 11 / 91

background image

2-1

3

REFRIGERATOR SAFETY

You can be killed or seriously injured if you don't immediately

You

can be killed or seriously injured if you don't follow

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

follow instructions.

instructions.

DANGER

WARNING

WARNING

Tip Over Hazard

Refrigerator is top heavy and tips easily when not

completely installed.
Keep doors taped closed until refrigerator is

completely installed.
Use two or more people to move and install

refrigerator.
Failure to do so can result in death or serious injury.

INSTALLATION INFORMATION

Installation Requirements

WARNING

Excessive Weight Hazard

Use two or more people to move and install

refrigerator.

Failure to do so can result in back or other injury.

«
...
9
10
11
12
13
...
»

Summary of Contents for JB36NXFXLW00




























































































Reviews:

No comments

Related manuals for JB36NXFXLW00

Brand: Danby Pages: 20

Brand: Danby Pages: 24

Brand: Magic Chef Pages: 29

Brand: Jenn-Air Pages: 158

Brand: iBeeCool Pages: 6

Brand: GE Pages: 64

Brand: AYA Pages: 30

Brand: Igloo Pages: 1

Brand: Scandomestic Pages: 23

Brand: Galanz Pages: 6

Santo C 7 18 40-6i

Brand: AEG Electrolux Pages: 48

Brand: MicroFridge Pages: 2

Brand: Inalto Pages: 2

Brand: BOMANN Pages: 24

Brand: Rangemaster Pages: 32

Brand: Samsung Pages: 29

Brand: Samsung Pages: 68

Brand: Samsung Pages: 105

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands