Jenn-Air JB36NXFXLW00, Technical Education

Page: 49 / 91

4-3
42" and 48" Jenn-Air SxS (continued)
Top Door Hinge Planetary Adjustment
Top Door Hinge Adjustment
To adjust begin by loosening the two adjustable pins on the top hinge to allow the inner panel
to move. Adjust the lower pins to raise or lower the inner door panel or close the gap between
the hinge and inner door as needed, see figure 6. After making adjustments, tighten the top
adjustment pins and replace the cap screws.
Loosen the tap plate screws, see figure 7.
DO NOT REMOVE these screws, only loosen. If these screws are removed, they will drop into
the hinge cup and will take some time to fish out. Loosen the hinge screws, see figure7.
Adjust the door in our out as needed. Tighten the four hinge screws and the tap plate screws.
There is approximately 3-4mm of adjustment in the top hinge.
Tap Plate Screws
Hinge Screws
Hinge
Figure 6
Figure 7