Jenn-Air JB36NXFXLW00, Technical Education, Page: 56 / 91

4-10
1. Unplug refrigerator or disconnect power.
2. Remove 2 screws securing the cover to
the cabinet, see figure 1. Remove cover
to expose foam diverter block, see figure 2.
3. Remove block. Inspect seal area before
reinstalling, see figure 3.
4. Remove the air damper and disconnect
the wiring harness, see figure 4.
Accessing air damper
Damper Assembly
Figure 1
Figure 3
Figure 4
Figure 2
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
42" and 48" Jenn-Air SxS (continued)
12 Volt DC
Damper Door
The damper motor is operated by 12 volt DC.
Inspect the seal on the damper door and the
perimeter of the duct.