Jenn-Air JB36NXFXLW00 Technical Education Download Page 2 | Manualshive

Page: 2 / 91

background image

- ii -

WHIRLPOOL CORPORATION assumes no responsibility for any repairs made on

our products by anyone other than authorized In-Home Service Professionals.

FORWARD

This Job Aid (Part No.8178776), provides the In-Home Service Professional with information on

the installation, operation, and service of this refrigerator. For specific information on the model be

-

ing serviced, refer to the “Use and Care Guide,” or “Tech Sheet” provided with the refrigerator.
The Wiring Diagrams used in this Job Aid are typical and should be used for training purposes

only. Always use the Wiring Diagram supplied with the product when servicing the refrigerator.

GOALS AND OBJECTIVES

The goal of this Job Aid is to provide information that will enable the In-Home Service Professional

to properly diagnose malfunctions and repair Jenn-Air Integrated Built In Refrigerators.
The objectives of this Job Aid are to:

•   Understand and follow proper safety precautions.
•   Successfully troubleshoot and diagnose malfunctions.
•  Successfully perform necessary repairs.
•  Successfully return the refrigerator to its proper operational status.

Copyright

©

2009, Whirlpool Corporation, Benton Harbor, MI 49022

«
1
2
3
4
...
»

Summary of Contents for JB36NXFXLW00




























































































Reviews:

No comments

Related manuals for JB36NXFXLW00

Brand: Samsung Pages: 2

Brand: Zanussi Electrolux Pages: 52

Brand: Gorenje Pages: 28

Brand: Infiniton Pages: 28

Brand: GE Pages: 52

Brand: Amica Pages: 88

Brand: Tesla Pages: 80

600 Series BI-42SD

Brand: Wolf Pages: 2

Gastronorm Supra

Brand: Foster Pages: 12

Brand: Dacor Pages: 15

Brand: Aegis Pages: 12

Brand: ZANKER Pages: 36

Brand: Gibson Pages: 24

Profile PFSS5PJYSS

Brand: GE Pages: 2

PFSS6SKXSS - Profile 25.8 cu. Ft....

Brand: GE Pages: 2

Brand: Samsung Pages: 132

Brand: Samsung Pages: 42

GE Profile CustomStyle PSC23NGSBB

Brand: GE Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands