Jenn-Air JB36NXFXLW00 Technical Education Download Page 22

Page: 22 / 91

2-12

Option 2 - False Front (cabinet face only)

Standard Installation-Wood Panel

Requirements

IMPORTANT:

�

A Standard installation can be achieved with either a 24"

(60.9 cm) or 25" (63.5 cm) deep opening.

�

A standard grille is used to achieve a Standard installation.

Use the standard grille bracket (provided with refrigerator) to

attach the standard grille.

�

The grille panel height, shown in the Standard Installation

Flush Grille graphic, allows for an air gap critical to refrigerator

performance.

Standard Grille Bracket

Standard Installation - Side View

Standard Installation - Full Product View

Panel Kit Installation Requirements

See the “36" Models” or the “42" French Door Models” section to

see the panel kit options available for your model.
IMPORTANT:

�

A Panel Kit installation can be achieved with either a 24"

(60.9 cm) or 25" (63.5 cm) deep opening.

�

A standard grille is used to achieve a Panel Kit installation.

Use the standard grille bracket (provided with refrigerator) to

attach the standard grille.

�

The grille panel height, shown in the Standard Installation

Flush Grille graphic, allows for an air gap critical to refrigerator

performance.

6" (15.24 cm)

min.

84"

(213.4 cm)

Installation Requirements (continued)

Summary of Contents for JB36NXFXLW00




























































































Search results

Summary of Contents for JB36NXFXLW00

Reviews:

Related manuals for JB36NXFXLW00

Brands by name

Popular brands

Jenn-Air JB36NXFXLW00, Technical Education

Search results

Summary of Contents for JB36NXFXLW00

Reviews:

Related manuals for JB36NXFXLW00

Brands by name

Popular brands