JEI SteelBeat PRO PB10 Operator'S Manual Download Page 35

Page: 35 / 35

PB10 (PBE)

This document is protected by copyrights.

Copying, using, or distributing without permission of JEI Group Ltd is prohibited.

7. WARRANTY CARD

WARRANTY CARD No

.............

........................................................................... in the name of Manufacturer warrants

the PRO 10 PB (PBE) Pipe Bevelling Machine to be free of defects in material and

workmanship under normal use for a period of 12 months from the date of sale.

This warranty does not cover tool bits as well as damage or wear that arise

from misuse, accident, tempering, or any other causes not related to defects in

workmanship or material.

Date of production .........................................................................................................

Serial number ................................................................................................................

Date of sale ...................................................................................................................

Signature of seller ..........................................................................................................

1.09 / 17 October 2018

WE RESERVE THE RIGHT TO MAKE CHANGES IN THIS MANUAL WITHOUT NOTICE

Summary of Contents for SteelBeat PRO PB10




































Search results

Summary of Contents for SteelBeat PRO PB10

Reviews:

Related manuals for SteelBeat PRO PB10

Brands by name

Popular brands

JEI SteelBeat PRO PB10, Operator'S Manual

Search results

Summary of Contents for SteelBeat PRO PB10

Reviews:

Related manuals for SteelBeat PRO PB10

Brands by name

Popular brands