PB10 (PBE)
This document is protected by copyrights.
Copying, using, or distributing without permission of JEI Group Ltd is prohibited.
3
1. GENERAL INFORMATION
1.1. Application
The PRO 10 PB (PBE) is a pipe bevelling machine designed to mill pipes made of
carbon and stainless steel, aluminum alloys,
and copper-nickels.
Depending on
the
tool
bit
used,
the
machine
can
perform
external
and
internal
bevelling,
J-bevelling,
internal calibration, and facing pipes with inner diameters of 84
–269 mm (3.31–10.59’’).
Up to three tool bits can be installed at the same time.
An optional small expanding mandrel allows milling pipes with inner diameters
from 38 mm to 86 mm (1.50
–3.39’’). An extension set allows
milling
pipes
with
diameters from
192 mm to 349 mm
(7.56
–13.74’’).
Attachments allow facing pipe
flanges with diameters from 90 to 508 mm (3.54
–20.00’’) and milling oval pipes from
126 mm to 296 mm (4.96
–11.65’’).
1.2. Technical data
PRO 10 PB
PRO 10 PBE
Pressure
0.6 MPa (87 psi)
–
Voltage
–
1~ 110
–120 V, 50–60 Hz
1~ 220
–240 V, 50–60 Hz
Connection
CEJN 410 DN 10.4 R 1/2
’’
BSPT fitting for quick-coupling
Electrical plug
Air consumption
1750 l/min (62 CFM)
–
Power
1800 W
1800 W
Pipe inner diameter
84
–269 mm (3.31–10.59’’) 84–269 mm (3.31–10.59’’)
Maximum pipe wall thickness
15 mm
(0.59’’)
15 mm
(0.59’’)
Rotational speed without load
17 rpm
–
Nominal rotational speed
9 rpm
12
–29 rpm (gear I)
41
–96 rpm (gear II)
Protection class
–
II
Required ambient temperature
0
–40°C (34–104°F)
0
–40°C (34–104°F)
Noise level
More than 70 dB
Less than 70 dB
Weight (with motor)
33 kg (73 lbs)
35.9 kg (79 lbs)
