PB10 (PBE)
This document is protected by copyrights.
Copying, using, or distributing without permission of JEI Group Ltd is prohibited.
12
3.4. Clamping the machine into the pipe
Insert the machine into the pipe (
1
, Fig. 5) so that the tool bits are placed at least
3
mm (0.12’’) from the pipe end. Then, use the 24 mm socket wrench to rotate the
draw nut (
2
) to the right to expand the jaw blocks and clamp the machine into the
pipe. The jaw blocks must be installed beyond the end preparation location (
3
).
Fig. 5.
Clamping the machine into the pipe
3
3
1
2
