manualshive.com logo in svg

Jeep GLADIATOR 2023, Owner'S Manual

The Jeep Gladiator 2023 Owner's Manual is now available for free download. This comprehensive manual provides essential information and instructions on operating, maintaining, and troubleshooting your Jeep Gladiator. Get the most out of your vehicle by accessing the manual from our trusted manualshive.com and empower yourself with the knowledge you need.

Share
Download
background image

286

SAFETY

 

This vehicle may be equipped with a driver and/or front 

passenger seat belt buckle switch that detects whether 

the driver or front passenger seat belt is buckled. The seat 

belt buckle switch may adjust the inflation rate of the 

Advanced Front Air Bags.
This vehicle may be equipped with driver and/or front 

passenger seat track position sensors that may adjust the 

inflation rate of the Advanced Front Air Bags based upon 

seat position.
This vehicle has an Occupant Classification System 

(“OCS”) in the front passenger seat. The OCS is designed 

to activate or deactivate the Passenger Advanced Front Air 

Bag depending on the occupant’s seated weight. It is 

designed to deactivate the Passenger Advanced Front Air 

Bag for an unoccupied seat and for occupants whose 

seated weight classifies them in a category other than a 

properly seated adult. This could be a child, teenager, or 

even an adult.
The Passenger Air Bag Disable (“PAD”) Indicator Light (an 

amber light located on the overhead sports bar) tells the 

driver and front passenger when the Passenger Advanced 

Front Air Bag is deactivated. The PAD Indicator Light 

illuminates the words “PASSENGER AIR BAG OFF” to show 

that the Passenger Advanced Front Air Bag will not deploy 

during a collision.

NOTE:

When the front passenger seat is empty or when very light 

objects are placed on the seat, the Passenger Advanced 

Front Air Bag will not deploy even though the Passenger Air 

Bag Disable (PAD) System Indicator Light is NOT illumi

-

nated.

Front Air Bag Operation 

Front Air Bags are designed to provide additional 

protection by supplementing the seat belts. Front air bags 

are not expected to reduce the risk of injury in rear, side, 

or rollover collisions. The front air bags will not deploy in all 

frontal collisions, including some that may produce 

substantial vehicle damage — for example, some pole 

collisions, truck underrides, and angle offset collisions.
On the other hand, depending on the type and location of 

impact, front air bags may deploy in crashes with little 

vehicle front-end damage but that produce a severe initial 

deceleration.

Because air bag sensors measure vehicle deceleration 

over time, vehicle speed and damage by themselves are 

not good indicators of whether or not an air bag should 

have deployed.
Seat belts are necessary for your protection in all 

collisions, and also are needed to help keep you in 

position, away from an inflating air bag.
When the Occupant Restraint Controller (ORC) detects a 

collision requiring the front air bags, it signals the inflator 

units. A large quantity of non-toxic gas is generated to 

inflate the front air bags.
The steering wheel hub trim cover and the upper 

passenger side of the instrument panel separate and fold 

out of the way as the air bags inflate to their full size. The 

front air bags fully inflate in less time than it takes to blink 

your eyes. The front air bags then quickly deflate while 

helping to restrain the driver and front passenger.

Occupant Classification System (OCS) — 

Front Passenger Seat 

The Occupant Classification System (OCS) is part of a 

Federally regulated safety system for this vehicle. It is 

designed to activate or deactivate the Passenger 

Advanced Front Air Bag depending on the occupant’s 

seated weight. It is designed to deactivate the Passenger 

Advanced Front Air Bag for an unoccupied seat and for 

occupants whose seated weight classifies them in a 

category other than a properly seated adult. This could be 

a child, teenager, or even an adult.

WARNING!

No objects should be placed over or near the air bag 

on the instrument panel or steering wheel because 

any such objects could cause harm if the vehicle 

is in a collision severe enough to cause the air bag

to inflate.

Do not put anything on or around the air bag covers 

or attempt to open them manually. You may damage 

the air bags and you could be injured because the air 

bags may no longer be functional. The protective 

covers for the air bag cushions are designed to open 

only when the air bags are inflating.

Relying on the air bags alone could lead to more 

severe injuries in a collision. The air bags work with 

your seat belt to restrain you properly. In some colli

-

sions, air bags won’t deploy at all. Always wear your 

seat belts even though you have air bags.

23_JT_OM_EN_USC_t.book  Page 286  

Summary of Contents for GLADIATOR 2023





































































































































































































































































































































































































































Reviews:

No comments

Related manuals for GLADIATOR 2023

Harbor Freight Tools 92043 Assembly And Operating Instructions preview
92043
Brand: Harbor Freight Tools Pages: 4
Dynojet 24xLC2 Linx Installation Manual preview
24xLC2 Linx
Brand: Dynojet Pages: 68
Kuda-Phonebase 283410 Installation Instruction preview
283410
Brand: Kuda-Phonebase Pages: 3
AMP Research 75135-01A Installation Manual preview
75135-01A
Brand: AMP Research Pages: 12
Havis-Shields Half Size Trunk Box Organizer C-TBO-CV Installation Instructions preview
Half Size Trunk Box Organizer C-TBO-CV
Brand: Havis-Shields Pages: 1
Volvo S60 2012 Quick Manual preview
S60 2012
Brand: Volvo Pages: 8
Fab Fours VI-COWL Installation Instructions Manual preview
VI-COWL
Brand: Fab Fours Pages: 19
Lit Lightz RGBW Rock Lights Setup Manual preview
RGBW Rock Lights
Brand: Lit Lightz Pages: 3
JKS JKSOGS960 Installation Instructions Manual preview
JKSOGS960
Brand: JKS Pages: 6
true-i HMBS-200 User Manual preview
HMBS-200
Brand: true-i Pages: 11
Scosche HUD580GC Manual preview
HUD580GC
Brand: Scosche Pages: 12
Metra Electronics 99-7804 Installation Instructions Manual preview
99-7804
Brand: Metra Electronics Pages: 10
Edelbrock 71883 Installation Instructions preview
71883
Brand: Edelbrock Pages: 4
Quadratec 12057.0102 Installation Manual preview
12057.0102
Brand: Quadratec Pages: 8
Blue Ox BX2711 Installation Instructions Manual preview
BX2711
Brand: Blue Ox Pages: 8
Pinnacle EPL7SAM+C Series Quick Start Manual preview
EPL7SAM+C Series
Brand: Pinnacle Pages: 2
Yakima K846 Instructions Manual preview
K846
Brand: Yakima Pages: 10
Yakima K757 Instructions Manual preview
K757
Brand: Yakima Pages: 9

Brands by name

Popular brands

Load more brands