Jeep GLADIATOR 2023 Page 322 Owner'S Manual Download

Page: 322 / 420

320

IN CASE OF EMERGENCY

4. Rotate the lug wrench handle clockwise until the

wheel is drawn into place against the underside of

the vehicle. Continue to rotate until you feel the winch

mechanism slip, or click three or four times. It cannot

be overtightened. Push against the tire several times

to ensure it is firmly in place.

Reinstalling The Flat Or Spare Tire

EINSTALLING

ACK

OOLS

1. Position the jack and tool bag. Make sure the lug

wrench is under the jack near the jack turn-screw.

Jack And Tool Bag

2. Tighten the jack all the way down by turning the jack

turn-screw counterclockwise until the jack is snug.

3. Secure the tool bag straps to the jack.
4. Place the jack and tools in the storage position

holding the jack by the jack turn-screw, place the jack

and tools under the rear seat.

5. Turn the wing bolt clockwise to secure to the

floor pan.

Jack Hold Down Wing Bolt

WARNING!

A loose tire or jack thrown forward in a collision or hard

stop could endanger the occupants of the vehicle.

Always stow the jack parts and the spare tire in the

places provided. Have the deflated (flat) tire repaired or

replaced immediately.

WARNING!

After using the jack and tools, always reinstall them in

the original carrier and location. While driving you may

experience abrupt stopping, rapid acceleration or sharp

turns. A loose jack, tools or bracket or other objects in

the vehicle may move around with force, resulting in

serious injury.

23_JT_OM_EN_USC_t.book Page 320

Summary of Contents for GLADIATOR 2023





































































































































































































































































































































































































































Search results

Summary of Contents for GLADIATOR 2023

Reviews:

Related manuals for GLADIATOR 2023

Brands by name

Popular brands

Jeep GLADIATOR 2023, Owner'S Manual

Search results

Summary of Contents for GLADIATOR 2023

Reviews:

Related manuals for GLADIATOR 2023

Brands by name

Popular brands