Jeep GLADIATOR 2023 Page 57 Owner'S Manual Download

Page: 57 / 420

GETTING TO KNOW YOUR VEHICLE

The Interior Courtesy Lights are located in the center of the

vehicle’s sport bar, and consist of one large center light

and four smaller reading lights. Each reading light can be

turned on by pushing the lens. Pushing the lens a second

time will turn the light off.

Interior Courtesy Lights

When a door is open and the interior lights are on, rotating

the instrument panel dimmer control to the extreme

bottom position will cause all the interior lights to turn off.

This allows the doors to stay open for extended periods of

time without discharging the vehicle’s battery.

IMMER

ONTROL

The dimmer control is part of the headlight switch and is

located on the left side of the instrument panel.

Dimmer Control

Dimmer Control (Vehicles Sold In Canada)

With the parking lights or headlights on, rotating the

dimmer control upward will increase the brightness of the

instrument panel lights. Rotating the dimmer control will

also adjust the interior and ambient light levels

(e.g. courtesy lights in the footwell, illuminated

cupholders, and front door handles).

WINDSHIELD WIPERS AND WASHERS

The windshield wiper/washer control lever is located on

the right side of the steering column; it operates the

multiple wiper options. The front wipers are operated by

rotating a switch, located at the end of the lever.

INDSHIELD

IPER

PERATION

Windshield Wiper/Washer Operation

1 — Pull For Windshield Washer
2 — Rotate For Wiper Operation
3 — Push Up For Mist

23_JT_OM_EN_USC_t.book Page 55

Summary of Contents for GLADIATOR 2023





































































































































































































































































































































































































































Search results

Summary of Contents for GLADIATOR 2023

Reviews:

Related manuals for GLADIATOR 2023

Brands by name

Popular brands

Jeep GLADIATOR 2023, Owner'S Manual

Search results

Summary of Contents for GLADIATOR 2023

Reviews:

Related manuals for GLADIATOR 2023

Brands by name

Popular brands